Speedprint SP710 AVI Stencil Screen Printer

Description

In-line Stencil Printer

Max board size: 600mm(x) by 510mm(y)
Min board size: 50mm x 30mm
Maximum PCB Weight: 1Kg (2.2lb)
Underside component clearance: 3mm – 15mm
Underside edge clearance: 5mm
Minimum board edge clearance: 3mm
Repeatability accuracy: 20 (m @ 6 Sigma 2cpk (full process movement)
Max print area: 600mm (x) x 510mm (y)
Max PCB thickness: Up to 8mm (0.2”) including 1% warpage
Min PCB thickness: 0.3mm
X/Y PCB Alignment: ±5mm
Radial PCB Alignment: ±3 degrees
Stencil Image: Front and center dedicated
Stencil load/unload: Automatic using print head
Stencil frame size (Max): 736.6mm [29”] x 736.6mm [29”] max frame height 40mm
Stencil frame size (Min): 584.2mm [23”] x 584mm [23”] max frame height 40mm
Squeegees: Metal or Polyurethane
Squeegee pressure: 1 – 20kg
Squeegee control: Pneumatic using proportional valve
Print speed: 5 – 250mm/sec
PCB separation speed: 0.1 – 20mm/sec
Print Modes: Print/print, flood/print, print/flood
Transfer height: 939.8mm [37”] – 965.2mm [38”]
Transfer height (Siemens): 830mm
Transport direction: Right-left, left-right, left-left, right-right
Transfer system: Single pair conveyors with round 3mm poly belt drive
Board clamping: Foils
Board stop: Mounted on camera and fully programmable
Throughput time: 11.5 seconds (excluding print time)
Up/down line protocol: SMEMA (alternative interfaces available)
Conveyor orientation: Front rail dedicated
Conveyor width adjustment: Automatic
Conveyors: 3mm “O” Ring
Power consumption: 13 amps
Power supply: 110V – 240V
Air supply: 6 Bar clean air supply
PCB support: Manual magnetic pins
Vision: Look down/look down
Camera field of view: 10mm by 10mm
Camera system: Dual roving camera
User interface: Flat screen LCD monitor with Stainless Steel IP65 rated keyboard and integral tracker ball
Number of fiducials: 2
Fiducial size: 0.5 – 5mm
Fiducial location: Anywhere on the PCB
Stencil paste availability: Automatic measurement/alert