Mek (Marantz Electronics) PowerSpector 550 BTL Automatic Visual Inspector

Description

PowerSpector 550BTL (D22X-550L)

– Dual side or bottom up only inline full featured inspection

– High Speed 90Fps thunderbolt main camera and USB 3 Vision Cameras side cameras

– Synchronized top and bottom inspection

– Multi-color 4 angle lighting with Line Source Coaxial Lighting and Meniscus Profiler

– Inspects: SMT & THT (missing, type, polarity, offset, text, colors, etc.), Component Height and Coplanarity, Solder Paste and CIP (Components in Paste; pre-reflow), Soldering: Post Reflow, Post Wave, Selective, Manual, THT solder inspection

– Low Noise Large CCD High Speed 24 bit Color Camera

– Product type Automatic Optical Inspector

– In-line/Off-line In-Line

– Camera movement X + Y Direction

– PCB movement Stationary during inspection

– Parts inspection Presence, Polarity, Offset, Correctness, Soldering, Height

– Printing/paste inspection Offset, Smearing, Bridges, Uniformity

– Image Processing Synthetic Imaging, Spectral Analysis, Greyscale limits

– Image Parameters Brightness, Hue, Saturation via Filters

– Camera type Digital color Thunderbolt interface 90 Fps

– Camera Field Of View/Resolution 38.5×38.5mm/18.75μm or 19.5×19.5mm/10μm

– Lens Telecentric lens with built in prism for DOAL Lighting

– Smallest inspection component size 01005″ (0.4×0.2mm)(10μm resolution)

– Positioning accuracy Pixel related Feedback Loop

– Component clearance (top) GTAz 30mm (1.2″) GDAz 60 mm (2.4”)

– Side Cameras 8x Digital color USB 3.0 Vision in 45/45 orientation

– Z-Axis movement range 30mm (1.2″)

– Component clearance (bottom) 30mm (1.2”) with GTAz bottom camera or 60mm (2.4”) – GDAz bottom camera

– Maximum PCB Size 350x250mm (13.8″ x 9.8″) 550x550mm (21.6″ x 21.6″)

– Movement speed 720mm/s

– Inspection capacity typical 2750ppm

– Electrical requirements 100-240 VAC / 330W